Your gateway to a wide range of natural resources information and associated maps

Victorian Resources Online

Site LP61a and b

Back to Bet Bet Creek Catchment Homepage

Site 61a

Group: Lexton Landcare Group

Australian Soil Classification: Vertic (and Manganic), Mottled-subnatric, Brown SODOSOL

General Landscape Description: Located on a minimal midslope position on an undulating volcanic plain (slope 1.5%). This site is in a more poorly drained situation than site 60.
Geology: Quaternary basalt.

Photo: Soil Site LP60&61 Landscape
Site LP60&61 Landscape


Soil Profile Morphology (61b):

Surface Soil
Photo: Site LP61b Soil Profile
Site LP61b Profile
A110-10 cmDark greyish brown (10YR4/2); very fine sandy clay loam; hardsetting surface condition; moderate very fine to fine polyhedral structure; weak consistence moist; pH 5.2; abrupt change to:
A1210-15cmDark brown (10YR4/3); very fine sandy clay loam; weak consistence moist; contains very many (50%) manganese nodules (3 mm); pH 5.7; abrupt change to:
Subsoil
B2115-20 cmYellowish brown (10YR5/4); medium clay; moderate fine polyhedral structure; firm consistence moist; contains many (20%) manganiferous and ferro-manganiferous nodules (3-10 mm size); pH 5.9; abrupt change to:
B2220-40 cmBrown (10YR5/3) with brownish yellow (10YR6/6) mottles; medium to heavy clay; moderate medium prismatic structure; strong consistence dry; pH 6.7; gradual change to:
B2340-70 cmBrown (10YR4/3) with a yellowish brown (10YR5/8) mottles; heavy clay; moderate very coarse prismatic structure (with dark stains on ped faces); strong consistence moist; pH 7.3; gradual change to:
B2470+ cmBrown (10YR5/3) with yellowish brown (10YR5/6) mottles; heavy clay; moderate very coarse prismatic, parting to moderate very coarse blocky structure; dark manganiferous stains; slickensides present; strong consistence moist; pH 8.0.

Key Profile Features:
  • Strong texture contrast between the surface (A) horizons (26% clay) and the subsoil (B21) horizon (>59% clay).
  • Variable presence and depth of subsurface (A2) horizon due to gilgai microrelief.
  • Vertic properties (i.e. slickensides) in deeper subsoil.
Soil Profile Characteristics:

Site 61b
pH
Salinity Rating
Surface
(A1 horizon)
strongly acid
very low
non-sodic
none
Subsoil
(B21 horizon)
moderately acid
very low
sodic
none1
Deeper subsoil
(at 80 cm)
moderately alkaline
very low
sodic
slight-moderate
1 Complete dispersion after remoulding.

Graph: Site LP61b  pH levels
Graph: Site LP61b Salinity levels
Graph: Soil Site LP61a Sodicity levels
Graph: Site LP61b Clay%
Horizon
Horizon Depth
pH
(water)
pH
CaCl2
EC
dS/m
NaCl
%
Exchangeable Cations
Ex Al
mg/kg
Ex Ac
meq/100g
Field
pF2.5
Wilting Point
pF4.2
Coarse Sand
(0.2-2.0mm)
Fine Sand
(0.02-0.2mm)
Silt
(0.002-0.02mm)
Clay
(<0.002mm)
Ca
Mg
K
Na
meq/100g
A11
0-10
5.2
4.5
0.14

4.3
2
0.3
0.2
37

37.2
17.1
2
39
24
26
A12
10-15
5.7
4.7
0.07

4.2
3.2
0.2
0.3


B21
15-20
5.9
5
0.12

4.2
5.2
0.2
0.7


38
26.6
4
27
15
59
B22
20-40
6.7
5.4
0.05

5.6
11
0.2
1.5


48.5
35.5
1
7
1
87
B23
40-70
7.3
6
0.06

4.9
13
0.4
2.8








B24
70+
8
6.5
0.13

4.4
14
0.4
4









Management Considerations:

Whole Profile
  • Plant available water capacity (PAWC) is relatively moderate (estimated at approximately 120 mm). This is based on available laboratory data and assumes an effective rooting depth of 60 cm.
Surface (A) Horizons
  • The strongly acid surface horizon indicates that aluminium and manganese toxicity may occur. The exchangeable aluminium measured in the laboratory is not high but is only taken from one point in the paddock. A pH/aluminium test (sampled at the paddock level) may be appropriate to determine if lime is needed. Raising surface soil pH will help reduce any toxic effects.
  • The surface A1 horizon is similar to the surface of Site 60 (in terms of structure, particle size, nitrogen and organic matter). However, it is shallower and underlain by a less favourable subsoil.
  • The organic carbon and nitrogen levels are reasonable. Maintaining organic matter levels is important for soils with quite high silt and fine sand contents as it assists aggregate stabilisation.
  • The bleached subsurface (A2) horizon is irregular in occurrence but can be quite deep (ie. up to 60 cm). These bleached layers have a very low plant available water capacity (PAWC) and are poor in nutrients. This layer will become "spewy" when wet as water builds up on top of the slowly permeable subsoil (B) horizons. The irregular occurrence of the bleached horizons is likely to result in variations in crop response across the paddock.
Subsoil (B) Horizons
  • The upper subsoil is coarsely structured and becomes more sodic with increasing depth. Also, from 20 cm, the calcium:magnesium ratio (<0.5) is low. These conditions are likely to result in restricted root and water movement through the profile.
  • The lower subsoil exhibits vertic properties and is likely to shrink and swell considerably on wetting and drying. This may have some implications for engineering purposes (e.g. building foundations).
Comments from Landholder:
  • Was originally "crabholey" country, but has since been levelled out by cultivation.

Soil Profile Morphology (61a):

Photo: Site LP61a Profile
Site LP61a Profile
In areas, a deep irregular bleached subsurface (A2) horizon can occur. It varies in depth from approximately 20 cm to 60 cm and is probably associated with the original gilgai microrelief. The bleached horizon has a silty clay loam texture and contains a large amount of ferro-manganiferous nodules (mostly greater than 1 cm diameter) towards its base. The bleached horizon is underlain by a yellowish brown (10YR5/4) mottled medium heavy clay.


Site 61a
pH
Salinity Rating
Surface
(A1 horizon)
strongly acid
very low
non-sodic
none
Subsoil
(B21 horizon)
slightly acid
very low
sodic
none1
Deeper subsoil
(at 1 m)
slightly alkaline
very low
strongly sodic
_
1 Complete dispersion after remoulding.
Graph: Soil Site LP61a pH levels
Graph: Soil Site LP61a Salinity levels
Graph: Soil Site LP61a Sodicity levels
Graph: Site LP61a Clay%
Horizon
Horizon Depth
pH
(water)
pH
CaCl2
EC
dS/m
NaCl
%
Exchangeable Cations
Ex Al
mg/kg
Ex Ac
meq/100g
Field
pF2.5
Wilting Point
pF4.2
Coarse Sand
(0.2-2.0mm)
Fine Sand
(0.02-0.2mm)
Silt
(0.002-0.02mm)
Clay
(<0.002mm)
Ca
Mg
K
Na
meq/100g
A1
0-25
5.2
4.5
0.09

4.2
1.7
0.2
0.1
29

35
15.3
1
39
30
25
A2
25-60
6.1
4.9
0.05

2.3
2
0.2
0.2


23.8
9.6
2
47
29
22
B21
60-95
6.9
5.5
<0.05

3.4
11
0.2
2.2


44.3
35.8
0.9
7
0
92
B22
95+
7.1
6
0.08

2.9
6.7
0.3
3.1


Profile Described By: Mark Imhof, Paul Rampant, Karen de Plater (10/4/95).
Page top